Install TV Wall Mount On Brick Fireplace

Installing a TV wall mount on a brick fireplace can be daunting, but with the right tools and know-how, it’s a DIY project you can accomplish. In this article, we’ll provide a step-by-step guide to installing a TV wall mount on a brick fireplace, including tips on choosing the right mount and the tools you’ll need to get the job done.

Choosing the Right TV Wall Mount

Before installing your TV wall mount, you must choose the right one for your TV and fireplace. There are a few factors to consider, such as the size and weight of your TV, the type of mount you want, and the type of brick your fireplace is made of.

First, you’ll need to determine the VESA pattern of your TV, which is the distance between the mounting holes on the back of your TV. This will help you choose a mount that is compatible with your TV. Next, consider the weight of your TV and choose a mount that can support it.

There are three types of TV wall mounts: fixed, tilting, and full motion. Fixed mounts are the most basic and affordable option, but they don’t offer any flexibility in adjusting your TV’s angle. Tilting mounts allow you to tilt your TV up or down for better viewing angles. Full-motion mounts offer the most flexibility, allowing you to tilt, swivel, and extend your TV.

Lastly, consider the type of brick your fireplace is made of. If you have an older home with soft bricks, you must use a masonry anchor to secure your mount. If you have newer, harder bricks, you may be able to use a lag bolt to secure your mount.

Tools You’ll Need

To install your TV wall mount on a brick fireplace, you’ll need a few tools, including:

  • Stud finder
  • Masonry bit
  • Drill
  • Socket wrench
  • Level
  • Pencil
  • Tape measure

Step-by-Step Guide to Installing Your TV Wall Mount

Now that you have the right mount and tools, it’s time to install your TV wall mount. Here’s a step-by-step guide to help you get the job done:

Step 1: Locate the Studs

Use a stud finder to locate the studs behind your fireplace. If your mount doesn’t align with the studs, you must use masonry anchors to secure it.

Step 2: Mark the Mounting Holes

Hold your mount up to the wall and use a pencil to mark the location of the mounting holes.

Step 3: Drill the Holes

Using a masonry bit, drill holes where you’ve marked the mounting holes. Be sure to drill deep enough to accommodate the length of the anchors you’ll be using.

Step 4: Install the Anchors

If you’re using masonry anchors, insert them into the holes you’ve drilled and tap them gently with a hammer until they’re flush with the wall.

Step 5: Attach the Mounting Plate

Attach the mounting plate to the wall using the screws or bolts with your mount.

Step 6: Mount the Bracket

Attach the bracket to the back of your TV using the screws that came with your mount.

Step 7: Secure the Bracket to the Mounting Plate

Lift your TV onto the mounting plate and secure it using the socket wrench.

Step 8: Check the Level

Use a level to ensure that your TV is level.

Install TV Wall Mount On Brick Fireplace

How to Mount a TV on a Brick Fireplace (Updated)

Stone and Brick Fireplace TV Mounting Service Charlotte

How to Mount a TV Over a Brick Fireplace (and Hide the Wires

How to Mount a TV Over a Brick Fireplace –

How to Mount a TV Over a Brick Fireplace (and Hide the Wires

Flat Screen Installation on a Brick Wall or Fireplace – Neuwave

How to hide the TV wires over a brick fireplace (Quick guide)

Mounting a TV on Brick Fireplaces: 6 Steps to do it

TV Mount onto Brick Fireplace- Brick Integrity? DIY Home

TV Mounted on a Brick Fireplace in Lexington, Kentucky – Platinum

Mounting a TV on Brick Fireplaces: The Dos u0026 Donu0027ts

Flat screen TV mounting over brick fireplace South Hampton, NY

How to Mount a TV on a Brick Fireplace (Updated)

 

Related Posts: